ASK > INSPECT > TASK

ASK for it. INSPECT it. TASK it to done.

A tenant reporting a leak, a pest check before settlement, a risk assessment across 40 sites. InspecTask takes every request, assigns the right inspector, and tracks the response until it's signed off.

  • Runs in your Dynamics 365
  • Microsoft Entra ID SSO
  • Full audit trail
app.inspectask.com/dashboard
InspecTask dashboard
New ASKLodged by QR code, Level 3
Inspection #4821 signed off
3modes: ASK, INSPECT, TASK
0logins needed to ASK
1home for it all: your Dynamics 365
QRa code for every site
The problem

Requests get lost long before anyone inspects anything.

Requests arrive by email, phone and sticky note. Someone has to find an available inspector with the right licence. Findings sit in a report nobody actions. When a tenant, auditor or regulator asks "what happened?", nobody can say.

✕

No visibility

Managers can't see what's been inspected, what's overdue, or where the risk sits.

✕

Findings go nowhere

Issues are recorded but never assigned, chased, or verified as fixed.

✕

People stay silent

Without a safe, anonymous channel, the people who see problems first never report them.

What can you ask for?

One platform. Any inspection.

If someone needs to go and have a proper look, InspecTask can take the request, assign it and track it to done.

Rental & property

Routine, entry and exit inspections with photo condition reports.

Pest & termite

Timber pest and termite inspection checklists.

Risk assessments

Site and task risk assessments with ratings and controls.

Safety & WHS

Workplace walks, hazard reports and toolbox checks.

Building & defects

Pre-handover, defect and building condition inspections.

Fire & essential services

Extinguishers, exits, alarms and annual statements.

Maintenance & make-good

Turn a request into a job, assign it and prove it's fixed.

Your own process

Build a template for anything that needs a proper look.

Before you buy Coming soonPre-purchase building, pest, strata and pool inspections, tracked to a decision.
See before-you-buy inspections
BEFORE & AFTER Coming soon

Prove what changed, from pickup to return.

On our roadmap: inspect a car, a piece of equipment or a property when it goes out, and again when it comes back, so new damage stands out.

  • Check-out and return on the same template, item by item
  • Photos side by side, time-stamped with GPS location
  • New scrapes and dents highlighted against the before record
  • Customer signs at both ends, so there's no dispute
  • TASK the outcome: repair quote, charge the customer or lodge a claim
Car & van hireEquipment & plant hireFleet handovers Rental bond entry & exitVenue & event hireLease make-good
Before & after · Booking #H-5521
Before and after vehicle inspection comparison
Design preview of a planned feature: pickup vs return, with the new scrape flagged.
Features

Everything from the first ask to the final sign-off

What InspecTask does today, and what's coming next. Built for teams who need results, not more paperwork.

Anonymous submissions

Public or staff can report hazards and defects via web link or QR code with no login, no names, and photo upload.

Inspection templates

Simple templates: Pass, Fail or N/A for each item, with notes and photos.

Coming soon Conditional logic, scoring and signatures

Assign & schedule

Assign each request to an inspector with a priority and due date.

Coming soon Skill, licence and location matching

Corrective actions

Turn any finding into an assigned action with due date, priority and evidence-of-fix before it can close.

Dashboards

See open requests, overdue tasks and completed inspections in Dynamics 365.

Coming soon PDF reports and Power BI

Inspect on your phone

Complete inspections on a phone or tablet with the Power Apps mobile app.

Coming soon Offline mode

Role-based access

Dynamics 365 security roles control what inspectors, supervisors and managers can see.

Microsoft 365

Microsoft Entra ID sign-in and Power Automate email notifications.

Coming soon Teams alerts and SharePoint storage

Audit trail & security

Every change is time-stamped and attributed with Dataverse auditing, in your own Dynamics 365 environment.

Three modes

ASK > INSPECT > TASK

Every request moves through three modes of activity, each built for the people doing that part of the work.

Mode 1

ASK

Raise a request

Who: Tenants, staff, the public, clients

  • Lodge by web link or QR code
  • Anonymous if they choose, no login needed
  • A photo, location and details
  • A tracking reference straight away
Mode 2

INSPECT

Go and have a proper look

Who: Inspectors, assessors, property managers

  • Assigned to the right inspector
  • Checklist templates for any inspection type
  • Notes and photos on a phone
  • Pass, Fail or N/A for every item
Mode 3

TASK

Get it fixed and signed off

Who: Trades, contractors, maintenance teams

  • Failed items become tasks with owners and due dates
  • Email reminders when tasks are overdue
  • Evidence of the fix before it can close
  • Every step recorded for audit

ASK>INSPECT>TASK>Signed off

Built on Microsoft

Runs on Azure. Lands in Dynamics 365.

No new silo. Every ASK, INSPECT and TASK is a record in your own Dataverse, so it works with the Microsoft tools you already use.

PublicASK form & QR codesNo sign-in, anonymous option
Staff & inspectorsInspecTask in Dynamics 365Staff sign in with Microsoft Entra ID
External peopleSecure task link Coming soonContractors complete a task without a licence
AzureStatic Web AppFast, globally distributed front end
AzureFunctions API (C#)Validates and saves every request
Dynamics 365DataverseRequests, inspections and tasks
Dynamics 365Assign tasks from DynamicsInternal teams now, external people soon
Microsoft 365Power AutomateEmail notifications and reminders
Microsoft 365Power BI Coming soonBoard and regulator reporting

TASK an external person, straight from Dynamics Coming soon

  1. Start in Dynamics. Create a task on any inspection finding and choose an external contractor, landlord or specialist.
  2. They get a secure link. A time-limited, single-use link by email or SMS. No account, no licence.
  3. They respond. Accept, add notes and photo evidence, and mark it done on their phone.
  4. It lands back in Dynamics. The task updates, the evidence is attached, and it's ready to verify and sign off.
Reporting

See every request, inspection and task at a glance

Dashboards in Dynamics 365 show what's open, overdue and done. Power BI reporting is coming soon.

Last 12 weeks Example data

Requests received0Last 12 weeks Example
Requests closed0Inspected and signed off
Average days to close0Across all sites
Still open0Received minus closed

Requests received vs closed

Per week, last 12 weeks

ReceivedClosed

Requests by inspection type

Last 12 weeks

Average days to close, by site

Target is 5 days

Over target

Example figures shown. Hover a chart for detail, or switch to a table.

Take a look

Designed to be used, not just bought

Design previews of the InspecTask experience. Clean, fast and familiar, so your teams actually use it.

Pricing

Start simple. Scale when you're ready.

Three plans that grow with your inspection program. All prices in AUD, excluding GST.

Anonymous Ask

Give everyone a safe voice

ASK

$1,500/month
  • Unlimited anonymous submissions
  • Branded web form & QR codes
  • Photo & location details
  • Email notifications to your team
  • Tracking reference for submitters
  • Export to Excel
Get started

Enterprise

Compliance at organisational scale

ASKINSPECTTASK+ scale

$20,000/month

Everything in Portal, plus:

  • Unlimited sites & business units
  • SharePoint & Teams integration Coming soon
  • Power BI reporting Coming soon
  • Custom workflows & approval chains
  • API access Coming soon
  • A named contact for onboarding & support
  • Priority support
  • Onboarding, migration & training included
Talk to sales
Compare all plan features
FeatureAnonymous AskPortalEnterprise
Anonymous web & QR submissions✓✓✓
Photo & location details✓✓✓
InspecTask in Dynamics 365–✓✓
Inspection templates & checklists–UnlimitedUnlimited
Assignment & email reminders–✓✓
Corrective action workflow–✓Custom
Inspect on your phone–✓✓
Offline mode–SoonSoon
Dashboards & reportingExcel export✓✓ (Power BI soon)
Entra ID single sign-on–✓✓
SharePoint & Teams––Soon
API access––Soon
Sites & business units1Up to 10Unlimited
SupportEmailBusiness hoursPriority + named contact
Founding customers

Help shape InspecTask

We're working with a small group of founding customers on Dynamics 365. You get early access, a say in the roadmap, and founding pricing.

Become a founding customer

FAQ

Questions, answered

What kinds of inspections can we run?

Any process where someone needs to go and look: rental, pest and termite, building and defects, risk assessments, safety and WHS, fire and essential services, maintenance, or your own custom templates.

Can we use it for vehicle or equipment hire?

Before and after inspections are on our roadmap. Today you can run a pickup and a return inspection on the same template; side-by-side comparison and customer sign-off are coming soon.

Who needs to sign in?

Only staff, inspectors and contractors who work in the InspecTask app sign in, using Microsoft Entra ID. Anyone submitting a request (ASK) never needs an account. Secure task links for external people are coming soon.

Are anonymous submissions truly anonymous?

Yes. No login, no name and no email are required. Submitters receive a tracking reference so they can check progress without ever identifying themselves.

Can we start on Anonymous Ask and upgrade later?

Absolutely. All your submissions and history carry straight across when you move to Portal or Enterprise. There's no re-implementation.

Where is our data stored?

In your own Dynamics 365 (Dataverse) environment, so it stays in the region your environment is in. An Australian environment keeps your data in Australia. Access follows your security roles, with Dataverse auditing.

Does it work with Microsoft 365 and Dynamics?

Yes. InspecTask runs inside Dynamics 365, with Microsoft Entra ID sign-in and Power Automate notifications. Teams, SharePoint and Power BI integrations are coming soon.

How long does it take to get going?

We'll agree a rollout plan with you. Once your Dynamics 365 environment is ready, ASK forms and QR codes can go live quickly, and we'll set up your first inspection templates together.

Is there a minimum contract term?

Anonymous Ask and Portal are month to month. Enterprise is offered on a 12-month agreement that includes onboarding and migration.

Let's talk

See InspecTask in action

Book a 30-minute walkthrough tailored to the inspections you run, the teams who do them, and your compliance obligations.

  • Live demo with your own inspection templates
  • Pricing and rollout plan for your organisation
  • No obligation, no hard sell

Book a demo

Email us and we'll set up a 30-minute walkthrough at a time that suits you.

Email us